General HPLC Accessories
Thermo Scientific Well Plate Support Racks for UltiMate Autosamplers and Column Compartments | | 1 EA
Type:Low Profile Support Rack, Sample Capacity:96 or 384 Wells, For Use With Equipment:Deep-Well Plates for All WPS-3000 LC Autosamplers Not ACC
Waters Corp Waters Filter, Last Drop, 2 μm, Patented Design, Stainless Steel/PTFE
This filter is designed to ensure the utmost purity of your eluent in liquid chromatography and other analytical applications. It features a 2-micron pore size for high-efficiency filtration, removing particulates as small as 2 microns. Its patented design optimizes flow rate and retention while minimizing backpressure. Constructed from durable stainless steel and equipped with a PTFE membrane, this filter guarantees reliable performance.
- Eliminates particulates from the last drop of eluent, improving the quality and reliability of analysis.
- 2 μm pore size for high-efficiency filtration.
- Maximizes flow rate and retention, minimizes backpressure.
- Easy installation.
- Available in 13 mm, 16 mm, and 20 mm sizes.
- Packaged in a sterile, single-use container.
- Recommended replacement every 6 months or after 1000 uses.
Waters Corporation Assembly, Cuvette Holder, 2 Cuvettes, ACQUITY FLR
This assembly includes a cuvette holder and two cuvettes, specifically designed for use with ACQUITY FLR systems. It functions as a cuvette flow cell, enabling the scanning and plotting of excitation and emission wavelength ranges, crucial for maintaining and enhancing system performance.
- Includes a cuvette holder and two cuvettes.
- Designed for ACQUITY FLR systems.
- Scans and plots excitation and emission wavelength ranges.
- Enhances performance of ACQUITY FLR systems.
Thermo Scientific Sample Racks for UltiMate 3000 Autosamplers, Column Compartments, and Fraction Collectors | | 1 EA
Support exceptional sample format versatility with Thermo Scientific Dionex Sample Racks used for UltiMate 3000 Autosamplers Column Compartments and Fraction Collectors for the WPS-3000 series UHPLC and LC samplers
Waters Corp ACQUITY UPLC Method Validation Kit, 1.7 μm, 130 Å, 2.1 mm x 150 mm
This method validation kit is designed to minimize method variation caused by differences in chromatographic media batch or column inconsistency. It includes three columns, each packed with a different batch of sorbent. These columns feature a trifunctionally-bonded phenyl-hexyl ligand, offering high chemical stability, reproducibility, and excellent peak shape for various analytes, especially those with aromaticity due to pi-pi interactions. The kit aims to provide a chemically stable phenyl sorbent with ultra-low column bleed and a long column lifetime.
- Chemistry: Phenyl
- pH range: 1 pH to 12 pH (recommended 2 pH to 11 pH)
- Maximum pressure: 18000 psi (1240 Bar)
- Particle size: 1.7 μm
- Pore size: 130 Å
- Dimensions: 2.1 mm x 150 mm
- Units per package: 3 pk
- System compatibility: UPLC, UHPLC
Waters Corp CORTECS Method Validation Kit, 120Å, 2.7 μm, 2.1 × 100 mm
CORTECS T3 method validation kits provide columns of three different batches. These columns are compatible with 100% aqueous mobile phases, offering excellent retention for polar and non-polar analytes. Their particle morphology provides high efficiency and lower backpressure compared to fully porous particles. CORTECS T3 columns ensure ultra-low MS bleed, long lifetimes, and excellent peak shape.
- Chemistry: C18
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8 pH
- Maximum pressure: 1240 bar (18000 psi)
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 120 Å
- System compatibility: UPLC, UHPLC
- Particle technology: Solid core
- USP classification: L1
- Inner diameter: 2.1 mm
- Length: 100 mm
- Carbon load: 4.7%
- Units per package: 3-pack
Waters Corp BioResolve RP mAb Polyphenyl Method Validation Kit, 450 Å, 2.7 μm
The BioResolve RP mAb Polyphenyl Method Validation Kit is for LC and LC-MS analyses of intact IgG monoclonal antibodies and their fragments. It uses columns with 2.7-μm solid-core silica particles and 450 Å pore diameter, with a proprietary polyphenyl bonding process. This kit enhances performance by minimizing analyte surface interactions, improving peak shape, recovery, and reproducibility.
- Columns feature 2.7-μm solid-core silica particles (450 Å average pore diameter).
- Proprietary polyphenyl bonding process for mAb analysis.
- MaxPeak HPS minimizes analyte-surface interactions.
- Compatible with HPLC, UHPLC, and UPLC™.
- eCord™ stores column performance history and usage data.
- Tolerates 10,000 psi (689 bar) from 50°C to 90°C with pH 2 to 7.
Waters Corp Waters Labeling Module, RapiFluor-MS, N-Glycan Analysis, 96-Sample
The GlycoWorks RapiFluor-MS Labeling Module is a 96-sample kit for N-glycan analysis. It uses RapiFluor-MS to enhance fluorescence quantification and mass spectral response, streamlining sample preparation for analysis in as little as 30 minutes.
- Enhanced fluorescence quantification and mass spectral response
- Single label for comprehensive N-glycan analysis and monitoring
- Streamlined preparation for rapid deglycosylation, labeling, and clean-up in <30 minutes
- Dual detection capabilities for versatile analysis
- Optimized reagents ensure efficient N-glycan release and high yield
- Robust clean-up via HILIC μElution Plate
- High throughput, designed for 96 samples
- Mass spectrometry compatibility for direct LC-MS analysis
Waters Corp Waters Active Flow Splitter Performance Maintenance Kit
This kit is designed to ensure the optimal performance and longevity of active flow splitters, providing the necessary components for routine maintenance.
- Ensures optimal performance of active flow splitters.
- Includes essential components for routine maintenance.
- Categorized as a spare parts kit.
Mac-Mod Avantor ACE Excel Extended MDK, (SuperC18, C18-Amide, CN-ES), 3 µm, 2.1 x 50 mm
All Avantor ACE UHPLC and HPLC Method Development Kits are comprised of analytical columns with different bonded phases, specially priced at the list price of 1 column to ensure that chromatographers can evaluate different bonded phase chemistries that provide alternative selectivity during the method development stage of their analytical projects. Evaluate all 5 ACE Method Development kits to explore the selectivity space (Advanced, Extended, UltraCore, HILIC and Bioanalytical). All Avantor ACE Method Development kits are tested to meet the stringent internal quality standards. The columns selected for each kit are designed to leverage different modes of interaction (pi-pi, dipole-dipole, hydrophobic, hydrogen bonding, or shape selectivity). All columns in the kit are the same column ID, column length and particle size. NOTE: Avantor ACE Method Development Kits cannot have any special lot or batch requests.
Waters Corp Waters Method Validation Kit, CORTECS C18+, 2.7 μm
This CORTECS C18+ Method Validation Kit provides essential tools for method validation, designed for high-performance liquid chromatography applications. It includes columns with 2.7 μm particle size and 2.1 x 50 mm dimensions.
- Kit contains three columns from three batches of material.
- Features CORTECS C18+ chemistry.
- Designed with 2.7 μm particle size.
- Column dimensions are 2.1 x 50 mm.
Waters Corporation Mixer, 250 μL, Titanium, Bio-Inert
This 250 μL mixer is an optional component designed for the H-Class Bio Quaternary Solvent Manager. Made of titanium, it replaces the standard 100 μL mixer in applications requiring the smoothest baseline when using an optical detector.
- Designed for H-Class Bio Quaternary Solvent Manager systems.
- Features a 250 μL volume.
- Constructed from titanium.
- Replaces standard 100 μL mixers for enhanced performance.
- Recommended for monitoring low UV wavelengths (below approximately 225 nm) in the presence of UV-absorbing mobile phases.
- Provides a smoother baseline for optical detection.
- Can be used in mass spectrometry systems when methods are intended for both MS and UV detection.
Waters Corp Waters Tube Assembly, Mixer to Mixer, Spare Part
This product is a tube assembly designed for mixer-to-mixer connections, categorized as a spare part.
- Designed for connecting mixers.
- Available as a spare part.
- Supports continuous operation of analytical systems.
Cambridge Isotope Laboratories Method 1668A/B/C Cleanup Standard Solution (13C12 99%) 1 ug/mL in nonane 1 2 mL
Method 1668A/B/C Cleanup Standard Solution (13C12 99%) 1 ug/mL in nonane 1 2 mL